Why China OEM Motorcycle stator supplier distinguishes?

June 15,2021

With China's equipment manufacturing industry flourishing, you may find yourselves being inundated with numerous choices among China OEM motorcycle stator supplier/manufacturer.If you don't know what to do, why not just click there for more information ?

 

China OEM motorcycle stator supplier/manufacturer

 

 

WHAT IS MOTORCYCLE STATORS?

A stator is a coil of wire which is set inside the engine case. With a magnet on a shaft spins.creating alternating current.Then the current travles through wire and case, then into the regulator, which converts it to DC power and a long-lasting output.

 

China OEM motorcycle stator supplier/manufacturer

How to test a motorcycle stator?

If a dead motorcycle battery causes a starting issue, we often assume the battery is faulty. Typically, this is correct, as motorcycle batteries fail more frequently than stators fail. However, before assuming the battery is at fault and installing a brand new one, an experienced technician will rule out the charging as the cause of the problem.

     If the motorcycle charging system is not properly charging the battery, simply replacing it will not solve the issue. Additionally, a discharged battery will need to be brought up to full charge prior to static or load testing it. 

     A technician uses a multimeter to test a stator, either with or without a running engine. With the engine off, a technician can test for a broken winding wire. With the engine running, a technician can test voltage going into the battery. Using a series of tests and chronological steps, a technician can rule out faults in the charging system, determining if the battery is ultimately the cause of the no-start scenario. 

 

 

QUICK DETAILS

 

Copper wire

 

-With Special Grade enameled copper wire, to assure the excellent conductivity property and insulating property.

 

Iron core

 

-Iron core made of cold rolled plate with better heating diffusion property.

 

Framework

 

-Framework made of Nylon66 or reinforced PP, with good heat dissipation(180-220 Celsius)and long service life.

 

 

These products below are recommended for your convenience.They are all qualified  China OEM motorcycle stators.With merits above, you will have no more problems on choosing  excellent products.

 

 

China OEM motorcycle stator supplier/manufacturer

 

STATOR C100/110

Parameter: 6P/2H,HALF-WAVE

 

 

China OEM motorcycle stator supplier/manufacturer

 

STATOR XR150/SANYA200

Parameter: 18P,3H

 

More information of China OEM motorcycle parts,please click there. We also offer CYLINDER KIT, SHOCK ABSORBER, TRANSMISSION SHAFT, CARGO TRICYCLE PARTS, ELECTRIC PARTS, CRANKSHAFT, CONNETCTING ROD KIT, STATOR.

You can also contact us:

TEL:  +86 23-6789 7382    E-mail:   sales@kalida.cc

        +86 23-6263 0305                   info@kalida.cc

SHARE US: