How To Replace Motorcycle Filter?

The air filter is mainly used in pneumatic machinery, internal combustion machinery and other fields. Its function is to provide clean air for these mechanical equipment, so as to prevent these mechanical equipment from inhaling air with impurity particles during work and increasing the probability of abrasion and damage.

The main components of the air filter are the filter element and the casing, in which the filter element is the main filtering part, which undertakes the filtration of gas, and the casing is the external structure that provides necessary protection for the filter element. The working requirements of the air filter are to be able to undertake high-efficiency air filtration, not to increase too much resistance for airflow, and to work continuously for a long time.

How Often Do I Change The Motorcycle Filter?

The motorcycle filter original must be cleaned or replaced regularly. Otherwise, it will affect the combustion effect of the engine This will lead to the decline of vehicle power and the increase of fuel consumption.

The air filter of the motorcycle is located at the front end of the fuel supply system. Its main function is to filter impurities in the air. Keep the oil supply system clean. Therefore, its role should not be underestimated.

If the process is used normally. Do not clean the air filter. Then it gets worse because of its air permeability. It affects the amount of air intake into the fuel supply system.

On this premise, the fuel mixture ratio of motorcycle will change. At this time, the most common phenomenon is the black smoke from the exhaust pipe. If the exhaust pipe has ever emitted black smoke. spark plug. The oxygen sensor and other corresponding components will be damaged.

The cleaning or replacement of air filter shall be based on mileage. But it also needs to be combined with local use. Usually, 3000 kilometers around should be cleaned once. About 5000 kilometers, it is best to replace the filter element. If the normal road condition is good, the period can be extended.

How To Replace Motorcycle Filter?

1. The first step is to open the engine compartment cover and confirm the position of the air filter. The air filter is generally located on the side of the engine. You can see a square plastic black box in which the filter element is installed. We need to gently break the three metal clips towards the side to lift the upper cover of the whole air filter.
2. The second step is to take out the air filter element. If the air filter is seriously blocked, it needs to be replaced with a new one Pay attention to two points when replacing a new filter element. First, the front of the filter element must face up. Secondly, the right angle in the four corners of the filter faces to the lower left.
3. The third step is to thoroughly clean the air filter box after handling the air filter element. Generally, a large amount of dust will accumulate under the air filter, which is the culprit of the decline of engine power.
4. The last step is to put the new air filter in a proper position. Fasten the buckle.

It is recommended to buy from regular wholesale motorcycle filter exporter. KALIDA is a specialized motorcycle filter manufacturer. If you are looking for high quality motorcycle, welcome to contact us.