How To Maintain Motorcycle Filter?

We need to pay more attention to the daily maintenance and repair of the filter. Only by paying attention to regular cleaning, inspection and repair in the process of normal use, can we avoid making up for faults under its long-term overload work, so as to improve work efficiency, prolong the service life of the filter and make the filter work better for us in the future.

 

 

Let's introduce the daily maintenance methods of the filter:

 

Clean And Replace The Filter Element Regularly

 

In the process of use, the filter element of the air filter should be cleaned regularly according to the vehicle maintenance regulations, so as to avoid increasing the air inlet resistance, reducing the engine power and increasing the fuel consumption due to too much dust adhering to the filter element. If the filter element is damaged, it shall be replaced in time.

 

Correct Installation 

 

When checking and maintaining the air filter, the gasket on the filter element must be installed properly. If the gasket is aged, deformed or broken, replace it with a new one. Remember not to install it. It should be noted that prevent air from entering the cylinder without filtration.

 

Replacement Of A New Filter Element

 

High-quality filter element should be selected instead of inferior filter element. KALIDA is a professional Chongqing motorcycle filter, a China motorcycle filter manufacturer. Welcome to contact us, if you are looking for motorcycle filters.

 

Air Filter

 

Properly installing the air filter can reduce the wear of parts such as cylinder, piston and piston ring. Generally, it is cleaned every 5000 kilometers, and the air filter must be replaced every 10000 kilometers.

 

Oil Filter

 

The correct installation of the oil filter can prevent impurities from mixing into the oil during the use of the internal combustion engine, and prevent the wear of moving parts and the blockage of the oil circuit. When changing the lubricating oil, the oil filter must be changed at the same time, otherwise the quality of the lubricating oil will be affected. The cycle of changing oil and oil filter is generally once every 5000 km.

 

Fuel Filter

 

Proper installation of fuel filter can prevent cylinder wear caused by impurities and moisture mixed in gasoline during storage and filling. In order to ensure the good operation of the engine, the cycle of replacing the fuel filter is generally 20000 km or 1 year.

 

Transmission Filter

 

Proper installation of the transmission filter can prevent the mixing of oil sludge and metal debris in the oil, graining, oil circuit blockage, strain the valve body, shift impact, etc., maintain the cleanliness of the transmission oil and prolong the service life of the transmission. The replacement cycle of transmission filter depends on the replacement time of transmission oil, which needs to be replaced at the same time. It is recommended to replace the oil every 40000 km for automatic transmission and every 3 years or 100000 km for manual transmission.

 

Oil Regularly

 

It is very important to oil the filter regularly. 

 

The above is about the daily maintenance of the filter. I hope it can be helpful to you in your usual use. Next, we recommend a brand of filter - KALIDA. You can pay attention to it.